01473 276672Open 9:00am-5:00pm Mon to Fri

01473 276672Sales advice & customer services

Mon:
Tue:
Wed:
Thu:
Fri:
Sat:
Sun:
09:00 - 17:00
09:00 - 17:00
09:00 - 17:00
09:00 - 17:00
09:00 - 17:00
Closed
Closed
Online contact us formCreate return request
0 ItemsTotal £0.00Total £0.00
Your shopping basket is empty

Trace Heating Products

Our range of trace heating products allows you to choose the different components for your trace heating separately or as a pre-made kit.

Frequently asked questions

Yes, when using trace heating on plastic pipes ensure that ATE- 180 aluminium tape is used to help disperse the heat around the pipe.

Yes, utilising our in-house design facilities, we can design your complete trace heating requirement.
If the surface area of the pump is substantially greater than that of the adjoining pipework then extra heating cable may need to be considered (depending on wattage of cable installed). Pumps and valves may be heat traced with extra heating tape to allow removal of the valve or pump.
Most applications can simply be straight traced, reducing costs of materials and installation time without compromising on operational requirements.

Yes, thermal insulation is required on all heat trace applications. Without insulation, surface heat losses can increase approximately 4-5 times.

Generally, no maintenance of our trace heating systems is required but it is recommended that the system is checked for operational and electrical integrity periodically or prior to the winter or production run, depending on application.
Full termination instructions are provided with all our heating tapes
System checks depend on the system installed, constant wattage systems can be fully checked for insulation resistance and continuity. Self regulating systems can only be checked for insulation resistance. For assistance on system testing please contact our dedicated staff.

When water pipes are exposed to cold temperatures either outdoors, underground or in small spaces, you can protect them from freezing by wrapping them with heat tape. Heating tape is actually a cord or heat cable with encased electrical wire that when plugged in regulates the temperature around plastic or metal pipes.

This is used for a pipe freeze protection application.

Electric heat tracing, heat tape or surface heating, is a system used to maintain or raise the temperature of pipes and vessels. Trace heating takes the form of an electrical heating element run in physical contact along the length of a pipe.

Self limiting / self regulating heating tape adjusts heat output to equal the heat loss from the pipe work. As pipe temperature falls the electrical conductivity of the semi-conductive core increases causing the tape to increase heat output. As the pipe temperature increases the conductivity reduces and heat output decreases.